logo
Rumah Berita

Blog Perusahaan Tentang ADI HMC1118 High Isolation Silicon SPDT Nonreflective Switch

Sertifikasi
Cina ShenZhen Mingjiada Electronics Co.,Ltd. Sertifikasi
Cina ShenZhen Mingjiada Electronics Co.,Ltd. Sertifikasi
Ulasan pelanggan
Dikirim sangat cepat, dan sangat membantu, Baru dan Asli, akan sangat merekomendasikan.

—— Nishikawa dari Jepang

Layanan profesional dan cepat, harga barang yang dapat diterima.komunikasi bagus, produk sesuai harapan.Saya sangat merekomendasikan pemasok ini.

—— Luis Dari Amerika Serikat

Kualitas tinggi dan kinerja yang dapat diandalkan: "Komponen elektronik yang kami terima dari [ShenZhen Mingjiada Electronics Co., Ltd.] berkualitas tinggi dan telah menunjukkan kinerja yang dapat diandalkan dalam perangkat kami".

—— Richardg dari Jerman

Harga yang kompetitif: Harga yang ditawarkan oleh sangat kompetitif, menjadikannya pilihan yang sangat baik untuk kebutuhan pengadaan kami.

—— Tim dari Malaysia

Mereka selalu responsif dan membantu, memastikan kebutuhan kami dipenuhi dengan cepat.

—— Vincent dari Rusia

Harga bagus, pengiriman cepat, dan layanan pelanggan terbaik.

—— Nishikawa dari Jepang

Komponen yang handal, pengiriman cepat, dan dukungan yang sangat baik.

—— Sam dari Amerika Serikat

Bagian berkualitas tinggi dan proses pemesanan yang mulus. sangat merekomendasikan ShenZhen Mingjiada Electronics Co., Ltd untuk setiap proyek elektronik!

—— Lina dari Jerman

I 'm Online Chat Now
perusahaan Blog
ADI HMC1118 High Isolation Silicon SPDT Nonreflective Switch
berita perusahaan terbaru tentang ADI HMC1118 High Isolation Silicon SPDT Nonreflective Switch

Shenzhen Mingjiada Electronics Co., Ltd. supplies the ADI HMC1118 high-isolation silicon SPDT non-reflective switch, specifically designed for RF signal switching applications requiring stable impedance matching.

 

I. HMC1118 Product Details

1. HMC1118 Product Description

The HMC1118 is a broadband, silicon-based single-pole double-throw (SPDT) non-reflective RF switch developed by ADI. Operating across a frequency range of 9 kHz to 13 GHz, it utilises a 50 Ω non-reflective topology, the switched-off port is automatically terminated with a matching load, preventing port mismatch reflections from interfering with the upstream RF link. It is a general-purpose RF control device that combines performance across the low-frequency to microwave bands with high isolation, low insertion loss and high linearity. It is housed in a 4 mm × 4 mm, 16-pin LFCSP surface-mount package, suitable for high-density PCB layouts, and is widely used in RF signal switching applications requiring stable impedance matching. The device utilises 0 V/+3.3 V positive logic control, with 3.3 V and –2.5 V power supplies, eliminating the need for complex negative logic drive circuits and simplifying hardware design.

 

2. HMC1118 Key Specifications

- Operating frequency: 9 kHz to 13 GHz

- Insertion loss: 0.68 dB @ 8 GHz

- Isolation: ≥48 dB @ 8 GHz

- Power handling: 35 dBm on the pass path, 27 dBm on the termination branch

- 1 dB compression point (P1dB): 37 dBm (typical)

- Third-order intercept point (IP3): 62 dBm (typical)

- Settling time: 7.5 μs (0.05 dB accuracy)

- Control logic: 0 V / +3.3 V positive voltage control

- Impedance: 50 Ω non-reflective design

- Package: LFCSP-16 (4 × 4 mm) Analog Dev...

 

3. HMC1118 Product Features

1. Non-reflective 50 Ω architecture; both RF ports remain matched in the off state, suppressing signal reflections and protecting sensitive RF front-end components such as power amplifiers and mixers.

2. Ultra-wide frequency coverage, starting from a low frequency of 9 kHz, overcoming the traditional low-frequency limitations of GaAs switches and supporting multi-band switching across baseband, intermediate frequency and radio frequency bands.

3. Extremely low insertion loss ensures minimal signal path attenuation, safeguarding the signal-to-noise ratio of the RF link.

4. Ultra-high channel isolation provides strong crosstalk suppression between the two signal paths, making it suitable for multi-signal gating and signal source switching.

5. High linearity specifications, with excellent IP3 and P1dB performance; resistant to harmonic and intermodulation distortion under high-signal-level input.

6. Fast and stable settling time, suitable for high-speed scanning and automated test systems.

7. Unipolar logic control, with direct drive from the master control I/O, eliminating the need for level-shifting chips.

 

4. Product Advantages of the HMC1118

Compared to conventional reflective SPDT switches, the HMC1118’s greatest advantage lies in its **non-reflective matching characteristics**; it does not generate impedance step reflections during switching, thereby preventing spectral glitches and amplitude jitter, and significantly reducing the complexity of RF system commissioning. The silicon-based process ensures stability and consistency, with minimal batch-to-batch variation and controllable mass production yield; its broadband characteristics enable a single device to cover multi-band applications, reducing the variety of components required. High isolation enables effective isolation of the local oscillator and high-power transmitted signals during signal acquisition and receive chain switching, thereby protecting the receive channel; high linearity supports the switching of high-power RF signals, meeting the requirements of both test and measurement equipment and wireless communication devices. The compact LFCSP package saves board space and is suitable for portable devices and high-density RF board designs.

 

5. Typical Applications of the HMC1118

Suitable for RF test and measurement instruments, channel switching in signal generators and spectrum analysers, broadband wireless transceiver front-ends, relay communication equipment, radar intermediate frequency links, automated RF test fixtures, 5G Sub-6GHz RF modules, and satellite communication RF gating units. It can also be used in automated RF testing and RF calibration switching systems, and is suitable for RF platforms with stringent requirements for impedance stability and signal purity.

 

6. HMC1118 Product Summary

The HMC1118 is a broadband, non-reflective SPDT RF switch from ADI with well-balanced overall performance. Its key features include a non-reflective topology, high isolation, low insertion loss, high linearity and ultra-wide frequency coverage, addressing the issue of link distortion caused by port reflections in traditional RF switches. Suitable for both R&D prototyping and high-volume mass production, this device is the preferred solution for RF channel switching in test equipment, broadband communications and RF calibration systems.

 

berita perusahaan terbaru tentang ADI HMC1118 High Isolation Silicon SPDT Nonreflective Switch  0

 

II. HMC1118 Procurement, Selection and Buyer’s Guide

1. Key Considerations for Selecting the HMC1118

1. Confirm frequency band requirements: If the lower operating limit is below 100 kHz, the HMC1118 should be the first choice; the upper frequency limit does not exceed 13 GHz; for frequencies beyond this range, other microwave switch models must be selected.

2. Distinguish between reflective and non-reflective requirements: If the front end of the link contains reflection-sensitive components such as amplifiers, mixers or filters, a non-reflective switch such as the HMC1118 must be selected; for scenarios involving simple signal gating with an isolator at the rear end, a low-cost reflective SPDT may be used.

3. Power and linearity verification: When the input RF power is close to the 27–35 dBm range, be sure to verify the P1dB specification to prevent device compression or burnout.

4. Control interface: This model is suitable when the host controller only has 3.3 V I/O; if the system uses only 5 V logic or negative logic control, additional level conversion is required.

5. Package Selection: The mainstream variant of the HMC1118 is the HMC1118LP3DE in an LFCSP package; verify the full part number when procuring to avoid confusion with other switches in the same series.

 

2. HMC1118 Procurement Considerations

1. Lead Times: Some batches of ADI RF analogue devices have relatively long lead times; it is recommended that project R&D teams secure samples in advance and establish stable supply channels during the mass production phase.

2. Samples and Bulk Orders: During the R&D phase, prioritise requesting original samples to measure S-parameters, isolation and reflection metrics to confirm compatibility with the board; when purchasing in bulk, verify the batch number, original manufacturer’s label and traceability information, and reject refurbished, re-polished or loose new components.

3. Supporting Components: This device requires two power supplies: +3.3V and –2.5V. Ensure power supply circuits are incorporated into the design, as power supply ripple will directly affect the RF performance of the switch.

4. Alternative Options: In the event of supply chain constraints, other SPDT switches from the same brand may be evaluated in parallel. Compare differences in isolation, insertion loss and reflection characteristics; direct pin-to-pin replacement is not permitted.

 

3. Quality Acceptance Recommendations for the HMC1118

Upon receipt, prioritise verification of the consistency of the outer packaging, silkscreen printing and laser marking; key parameters such as insertion loss, isolation and return loss may be tested; for high-volume orders, commission a third-party testing organisation to conduct sampling to prevent defective products from entering the production line.

 

III. Supply Advantages of Shenzhen Mingjiada Electronics

Shenzhen Mingjiada Electronics has specialised in the distribution of electronic components for many years, establishing a global supply chain network. We have a long-standing track record of supplying electronic components and chips from hundreds of leading international brands. We offer genuine, original products both in stock and on a forward basis, whilst also supporting component recycling services, thereby serving customers in both supply and demand.

 

1. Guarantee of Genuine, Original Products: Through legitimate channels, all batches of materials are traceable. Professional quality inspections are carried out prior to warehousing, with strict controls in place to prevent refurbished, loose new or counterfeit materials. This ensures compliance with the material requirements for high-reliability projects in sectors such as test equipment, telecommunications and industry.

2. Extensive SKU Inventory and Rapid Response to Stock Requests: Our integrated warehouse network in Shenzhen and Hong Kong maintains a vast inventory of SKUs, including a wide range of RF chips, microwave components and analogue signal chain products. We can swiftly provide samples, support small-batch trial production and fulfil large-volume orders. For urgent requirements, we offer rapid order processing and dispatch to minimise R&D and production lead times.

3. One-Stop Procurement Across All Categories: Clients can centralise their procurement, reducing the number of suppliers they need to liaise with and simplifying supply chain management.

4. Flexible supply chain solutions: We support spot purchasing, forward price locking and sourcing of scarce materials, whilst offering specialised sourcing services for discontinued or hard-to-find RF components; we also provide electronic component recycling services to liquidate customers’ idle stock and reduce project inventory costs.

6. Comprehensive quality management system: We adhere to standardised quality inspection procedures and can provide dispatch documentation in accordance with customer requirements, meeting the incoming material control and system audit requirements of enterprises in the instrumentation, telecommunications and automation sectors.

Pub waktu : 2026-11-16 13:53:22 >> daftar berita
Rincian kontak
ShenZhen Mingjiada Electronics Co.,Ltd.

Kontak Person: Mr. Sales Manager

Tel: 86-13410018555

Faks: 86-0755-83957753

Mengirimkan permintaan Anda secara langsung kepada kami (0 / 3000)