Blog Perusahaan Tentang Mingjiada Electronics Supply TI Fixed Direction Voltage-Level Translators

Mingjiada Electronics Supply TI Fixed Direction Voltage-Level Translators

Shenzhen Mingjiada Electronics Co., Ltd. — Supplier of TI (Texas Instruments) directional voltage level shifters, which can be categorised as fixed-direction or controllable-direction level shifters. These devices utilise a direction pin to control the signal flow, enabling unidirectional step-up or step-down level shifting, and are suitable for single-channel to multi-channel signal conversion applications. Mingjiada Electronics maintains stock of mainstream models and supports both small-batch samples and large-volume orders; backed by an efficient logistics system, we ensure rapid product delivery.

I. Fixed-Direction Voltage Level Shifters

The data transmission direction for these devices is fixed (e.g. from A to B) and typically requires a direction control pin (DIR) to set it.

TXU0304: This is a 4-bit, dual-supply, in-phase, fixed-direction voltage level shifter. Both its A and B ports support a wide voltage range of 1.1V to 5.5V, with data rates of up to 200 Mbps. It utilises Schmitt trigger inputs, offers strong noise immunity, and has a low quiescent current of just 2.5 µA at 25°C, making it ideal for power-sensitive applications.

LMK00804BQWRGTRQ1: This is a high-performance clock fan-out buffer and level shifter compliant with the AEC-Q100 automotive standard. It supports a variety of input and output levels and features low jitter, making it suitable for applications with extremely high requirements for timing and reliability, such as automotive ADAS radar systems.

II. Automatic Bidirectional Voltage Level Shifter

The key feature of this type of device is that it does not require a direction control pin (DIR); it can automatically detect and switch the data transmission direction, greatly simplifying design and software control.

LSF0108QPWRQ1: An automotive-grade (AEC-Q100) 8-bit bidirectional multi-voltage level shifter. It supports adaptive direction detection, with a VCCA range of 0.95 V to 4.5 V and a VCCB range of 1.8 V to 5.5 V, and supports data transmission rates of up to 100 MHz. It is ideally suited for automotive applications such as infotainment systems, body control modules (BCMs) and ADAS.

TXB0604: A 4-bit high-speed automatic bidirectional voltage level converter. Its A port supports 0.9 V to 2 V, whilst the B port supports 1.65 V to 3.6 V. With a maximum data rate of up to 345 Mbps, it is specifically designed for high-speed serial interfaces such as QSPI, OSPI and eSPI.

PCA9306DCTR: A dual-channel bidirectional I²C and SMBus voltage level converter. It supports bidirectional voltage conversion between 1.2 V and 5 V, requires no direction pins, and is optimised for buses such as I²C and SMBus.

LSF0102QDCURQ1: An automotive-grade (AEC-Q100 Grade 1) dual-channel automatic bidirectional multi-voltage level converter. It requires no direction control pin and is specifically designed for signal interconnection between interfaces in different voltage domains—such as I²C, SPI, UART and GPIO—within automotive systems.

LSF0101DRYR: A single-channel automatic bidirectional multi-voltage level converter. It requires no DIR pin and is suitable for buses such as PMBus, I²C and SMBus.

Mingjiada Electronics supplies [TI] directional voltage level converters, including but not limited to:

TXU0101DRYR

TXU0101DBVR

TXU0101DTQR

TXU0101DCKR

TXU0202DCUR

TXU0202DTMR

TXU0202DTTR

TXU0102DCUR

TXU0102DTTR

TXU0102DTMR

TXU0104BQAR

TXU0104RUTR

TXU0104PWR

TXU0104DTRR

TXUN0104RUTR

TXU0304RUTR

TXU0304PWR

TXU0304BQAR

TXU0304DTRR

TXU0204PWR

TXU0204BQAR

TXU0204RUTR

TXU0204DTRR

For further information on [TI] voltage level converters or to enquire about sample prices, please visit the Mingjiada Electronics website (https://www.integrated-ic.com/) for further supply details.