Blog Perusahaan Tentang Mingjiada Electronics Supply TI Synchronous Buck Integrated Power Solution

Mingjiada Electronics Supply TI Synchronous Buck Integrated Power Solution

In power supply design for industrial automation, automotive electronics, telecommunications equipment, servers and embedded hardware, integrated synchronous buck DC-DC solutions have become the mainstream choice for point-of-load (POL) power supplies, thanks to their high power density, minimal peripheral circuitry and excellent conversion efficiency. Shenzhen Mingjiada Electronics Co., Ltd. — a long-standing supplier of the full range of TI (Texas Instruments) integrated MOSFET synchronous buck converters and integrated power modules — also offers component recycling and part sourcing services, providing power engineers with a one-stop solution for procuring genuine components.

General-purpose industrial integrated FET synchronous buck converters
- TPS54360: A classic wide-voltage model from the SIMPLE SWITCHER® series, featuring 4.5V–60V input, 3.5A continuous output, integrated high-side and low-side MOSFETs, support for adjustable switching frequency, an Eco-mode energy-saving function for light loads, and a wide operating temperature range of –40°C to 125°C. Commonly used in industrial 24V bus systems and energy storage auxiliary power supplies.
- TPS54538: 3.8V–28V input, up to 5A output, peak current control, integrated loop compensation eliminating the need for external compensation components, integrated bootstrap capacitor, supports frequency synchronisation and spread-spectrum modulation to reduce EMI; suitable for industrial control boards and test equipment.
- LMQ66430: 3V to 36V input, 3A output, featuring MINT low-interference technology to optimise switching node ringing, supports spread-spectrum modulation, functional safety-compliant, compact VQFN package; the preferred choice for robotics and measurement equipment.
- LM76005: Ultra-wide 3.5V–60V input, 5A output, up to 98% duty cycle, supports pre-biased start-up and ‘Power Good’ (PG) signal, comprehensive protection; suitable for high-voltage industrial DC power supply systems.

Automotive-grade synchronous buck converters
- LM63440-Q1 / LM63460-Q1: Automotive-grade ZEN1 architecture, 3V–36V input, 4A/6A current options, HotRod™ QFN package to reduce parasitic inductance, switch frequency adjustable from 200kHz to 2.2MHz, AEC-Q100 certified, for powering in-vehicle infotainment systems and ADAS peripherals.
- TPS62903Q-Q1: 3–18 V input, 3 A output, micro VQFN package, low quiescent current, switchable switching frequency, suitable for in-vehicle sensors and small ECUs.

Low-voltage, low-current, high-frequency synchronous buck regulators (for portable devices, embedded systems, and FPGA/MCU power supplies)
- TPS62170: 2.7 V to 10 V low-voltage input, 0.5 A output, 2.2 MHz high frequency, small SOT package, ultra-low quiescent power consumption; suitable for portable devices and IoT modules.
- TPS62810: High-frequency, low Iq synchronous buck regulator with output current ranging from 0.5A to 3A; available in a micro-package; specifically designed for point-of-load power supply to FPGAs, MCUs and SoCs.

Integrated Inductor Power Module
The TPSM series (e.g. TPSM65610) integrates a controller, MOSFET and inductor into a single package, significantly reducing the number of components on the BOM. The MagPack package enhances thermal performance and shortens power supply development cycles, making it suitable for high-density power boards in servers and telecommunications equipment.

Models supplied by Mingjiada Electronics:
TPS84621RUQR
TPS82674SIPR
TPS82695SIPR
TPS82672SIPR
TPS84610RKGR
TPS84320RUQR
TPS84210RKGR
TPS84410RKGR
TPS82676SIPR
TPS82677SIPR
TPS84620RUQR
TPS84250RKGR

Mingjiada Electronics is a long-term supplier of [TI] integrated synchronous buck converters and power modules. For further product details or to enquire about sample prices, please visit the Mingjiada Electronics website (https://www.integrated-ic.com/) for more information on our product range.