Blog Perusahaan Tentang TI AM2432BKEGHIALXR 32-Bit 800MHz Dual-Core Arm Cortex-R5F Sitara™ MCU

Shenzhen Mingjiada Electronics Co., Ltd. supplies and recycles the TI AM2432BKEGHIALXR 32-bit 800MHz dual-core Arm Cortex-R5F Sitara™ MCU.

The TI AM2432BKEGHIALXR is a 32-bit heterogeneous multi-core microcontroller from the Sitara™ series designed for high-performance industrial real-time control applications. Centred around an 800MHz dual-core Cortex-R5F, it is paired with a dedicated coprocessor, a TSN industrial communication engine and a hardware security module. It is specifically engineered for applications such as servo drives, PLCs and industrial robots that demand stringent requirements for real-time performance, communication capabilities and functional safety.

I. AM2432BKEGHIALXR Core Architecture and Processor Performance

The AM2432BKEGHIALXR employs a heterogeneous multi-core architecture to achieve an efficient division of labour between “real-time control + auxiliary management + communication processing”:

Main Core: Dual-core Arm Cortex-R5F (800MHz)

A 32-bit high-performance real-time kernel supporting ** both dual-core lockstep (DCLS) and dual-core parallel (AMP) ** operating modes, balancing functional safety with computational scalability.

Each core is equipped with 32KB I-Cache + 32KB D-Cache; the entire cache features SECED ECC error correction, providing resistance to interference and protection against data errors.

Tightly Coupled Memory (TCM): 64KB TCM per core in dual-core mode, totalling 128KB, with zero-wait access, supporting microsecond-level control loops.

Auxiliary Core: Single-core Arm Cortex-M4F (400MHz)

An independent coprocessor equipped with 256KB ECC SRAM, responsible for peripheral management, low-power tasks and protocol pre-processing, freeing up the R5F’s computing power to focus on real-time control.

On-chip Shared Memory

2MB OCSRAM (on-chip RAM), supporting flexible allocation of 8×256KB partitions, with full ECC support, meeting the data exchange and caching requirements of multi-tasking.

External Memory Interface

Supports 16-bit DDR4/LPDDR4 (up to 1600MT/s), with integrated ECC, enabling expansion to large-capacity memory to accommodate complex algorithms and data caching.

II. AM2432BKEGHIALXR Industrial Communication: TSN + Multi-Protocol, Real-Time Interconnection Core

The chip integrates a dual-port Gigabit PRU_ICSSG industrial communication subsystem, which is key to ‘real-time networking’ in industrial environments:

Time-Sensitive Networking (TSN): Supports standards such as IEEE 802.1AS/802.1Qbv/802.1Qbu, enabling microsecond-level synchronisation, low jitter and deterministic transmission, suitable for Industry 4.0 real-time Ethernet.

Mainstream Industrial Protocols: Built-in complete protocol stacks for EtherCAT, PROFINET, EtherNet/IP, IO-Link, Modbus and others, supporting parallel operation of multiple protocols.

Expansion Interfaces: Compatible with UART, SPI, I²C, CAN-FD and Δ-Σ decimation filters, covering connectivity for all scenarios involving sensors, actuators and remote I/O.

3. AM2432BKEGHIALXR Real-time Control Peripherals: Precise Drive, Multi-axis Synchronisation

Optimised for motor control and motion control, integrating high-precision dedicated peripherals:

Enhanced PWM (ePWM): High-resolution channels supporting dead-time control and symmetric/asymmetric waveforms, suitable for servo, stepper and BLDC motor drives.

Enhanced Capture (eCAP) / Enhanced Quadrature Encoder (eQEP): Precise acquisition of encoder signals, supporting multi-axis synchronous motion control to meet the requirements of industrial robots and CNC machine tools.

High-Speed Serial Interface (FSI): Low-latency, long-distance communication, suitable for distributed I/O and multi-controller cascading.

Multi-channel ADC: High-precision analogue acquisition, supports synchronous sampling, suitable for real-time monitoring of voltage, current and temperature.

IV. AM2432BKEGHIALXR Functional Safety and Information Security: Industrial-Grade Reliability

Functional Safety: Complies with IEC 61508 SIL-3 and IEC 61511 SIL-3 standards, featuring dual-core lockstep, ECC memory, hardware self-test, and voltage/temperature monitoring, suitable for high-safety industrial applications (Texas Instruments).

Cybersecurity: Integrated DMSC-L security controller, supporting hardware encryption (AES-256, SHA-2/3), secure boot, key storage and firmware signature verification to prevent data tampering and cyberattacks (Texas Instruments).

V. AM2432BKEGHIALXR Package and Electrical Specifications

Package: 293-pin FCBGA (11.1 × 11.1 mm, thickness 0.71 mm), suitable for high-density industrial motherboards.

Operating temperature: -40°C to 125°C (industrial-grade extended temperature range), suitable for extreme industrial environments.

Power Supply: Multi-domain power supply (core 0.895V, I/O 1.8V/3.3V, etc.), supporting low-power modes (sleep, standby) to reduce system power consumption.

VI. Typical Application Scenarios for the AM2432BKEGHIALXR

Leveraging its four-dimensional strengths in real-time performance, communication, security and control, the AM2432BKEGHIALXR is widely used in:

Servo drives and multi-axis motion control: High-precision closed-loop control, supporting EtherCAT/Profinet bus synchronisation.

Industrial PLCs / Remote I/O: Acts as a core controller, handling multi-protocol processing and real-time acquisition of distributed I/O.

Industrial / Collaborative robots: Multi-axis motion control, sensor fusion, and real-time communication.

Industrial gateways and condition monitoring: TSN networking, data acquisition, and predictive maintenance.

Test, measurement and automation equipment: High-precision control, high-speed data acquisition, multi-protocol compatibility.

VII. Summary of the AM2432BKEGHIALXR Product Positioning and Advantages

The AM2432BKEGHIALXR is the high-performance flagship model of TI’s Sitara™ industrial MCUs, with the following core advantages:

Ultimate real-time performance: 800MHz R5F + zero-wait TCM, microsecond-level control response.

All-scenario communication: Gigabit TSN + full protocol support, bridging the ‘last mile’ of industrial connectivity.

Security and reliability: Dual protection of functional safety and information security, suitable for harsh industrial environments.

High integration: Multi-core heterogeneous architecture + rich peripherals, reducing the need for external components and lowering BOM costs.